Product Overview
BLPK-T1-12-30 deviation switch is an efficient conveyor belt deviation detection device designed to prevent deviation problems in belt conveyor systems. It can issue an alarm or take shutdown measures when the conveyor belt deviates from the preset range by monitoring the running status of the conveyor belt in real time, thereby avoiding equipment damage and production interruption. BLPK-T1-12-30 is widely used in conveyor belt systems in industrial fields such as mining, chemical, power, and metallurgy.
Product Features
- High precision detectionBLPK-T1-12-30 is equipped with high-precision sensors that can accurately monitor the deviation of the conveyor belt, ensuring timely alarm or shutdown.
- Flexible angle settingThe action angle of this switch is 12 °, and the reset angle is 30 °. The angle setting is flexible and can be adjusted according to actual needs to improve adaptability.
- Durable materialsMade of high-strength and corrosion-resistant materials, it has excellent wear resistance and is suitable for use in various harsh environments.
- High protection levelEquipped with IP65 protection level, effectively dustproof and waterproof, suitable for use in high humidity or dusty environments.
- Automatic reset functionWhen the conveyor belt returns to normal, the switch will automatically reset without manual intervention, reducing maintenance costs.
technical parameter
- model：BLPK-T1-12-30
- Action angle: 12 ° (adjustable)
- Reset angle：30°
- contact rating：AC 250V 5A
- Protection level：IP65
- working temperature-25 ℃ to+60 ℃
- texture of materialCast aluminum or stainless steel casing
- Installation methodFixed installation on both sides of the conveyor belt
- weightApproximately 3.0kg
working principle
The BLPK-T1-12-30 deviation switch is installed on both sides of the conveyor belt and uses built-in sensors to monitor the status of the conveyor belt in real time. When the deviation angle of the conveyor belt reaches 12 °, the contacts inside the switch will be triggered, issuing an alarm or performing a shutdown operation. If the conveyor belt returns to normal, the switch will automatically reset to ensure stable operation of the system.
application area
- Mining industryUsed to monitor the deviation of ore conveyor belts, avoiding equipment damage and production stagnation.
- Chemical industryProtect the conveyor belt system during chemical processing and transportation to prevent safety hazards caused by deviation.
- Power industryMonitor the coal conveyor belt to ensure the normal operation of the system and reduce the failure rate.
- Metallurgical industryEnsure the stability of raw material and product transportation, and avoid equipment failures caused by deviation.
Installation and Debugging
- Installation locationIt is recommended to install it at key parts of the conveyor belt, such as corners or areas prone to deviation, to ensure effective monitoring of deviation phenomena.
- Electrical connectionConnect the switch to the control system according to the electrical wiring diagram to ensure accurate signal transmission.
- Debugging stepsManually shift the conveyor belt, check the triggering and resetting of the switch, and ensure that it can work accurately within the set angle.
Maintenance and upkeep
- Regular inspectionRegularly check the sensors and contacts of the switch to ensure there is no wear or damage.
- Cleaning treatmentKeep the equipment clean, especially the sensors and detection rods, to avoid dust or debris affecting the detection accuracy.
- Lubrication and maintenanceRegularly lubricate the moving parts to ensure their good flexibility and extend the service life of the equipment.
matters needing attention
- Stable installationEnsure that the switch is firmly fixed during installation to avoid affecting the detection effect due to vibration or impact.
- Fault handlingIf any malfunction is found, promptly inspect and replace damaged components to ensure the normal operation of the system.
epilogue
The BLPK-T1-12-30 deviation switch, with its high-precision detection, durable design, and automatic reset function, has become a key protective device in belt conveyor systems. Whether in the mining, chemical, power, or metallurgical industries, BLPK-T1-12-30 can effectively prevent deviation problems, protect the safe operation of conveying equipment, and improve production efficiency.
Related Q&A FAQs:
1. What is the scope of application of BLPK-T1-12-30 deviation switch?
BLPK-T1-12-30 is suitable for various belt conveyor systems, including mining, chemical, power, and metallurgical industries. It can effectively detect the deviation of the conveyor belt and take necessary measures to protect the equipment.
2. Can the action angle and reset angle of the deviation switch be adjusted?
Yes, the action angle of BLPK-T1-12-30 is 12 °, and the reset angle is 30 °. Users can adjust according to their actual needs to adapt to different operating conditions of the conveyor belt.
3. What is the protection level of BLPK-T1-12-30? Is it suitable for outdoor use?
BLPK-T1-12-30 has an IP65 protection rating and excellent dust and water resistance, making it suitable for use outdoors or in harsh environments such as high humidity and dusty workplaces.
