Product Overview:The NKPK-10-45 belt deviation switch is a high-performance monitoring device designed specifically for belt conveyor systems. This switch is used to detect and control belt deviation, effectively preventing equipment damage and production accidents caused by belt deviation, and ensuring the safe and stable operation of the conveyor system.
Main features:
High precision detectionNKPK-10-45 is equipped with a high-sensitivity sensor that can accurately detect belt deviation and respond promptly to prevent further belt deviation.
Dual level alarm functionThe equipment is equipped with a two-level alarm mechanism, which can issue different alarms or trigger shutdown signals when the belt deviates slightly or severely, improving the safety of the system.
durableMade of high-strength materials with excellent wear and corrosion resistance, suitable for various industrial environments, including harsh working conditions.
Protection levelEquipped with IP65 protection level, it can effectively prevent the intrusion of dust and moisture, and is suitable for operation in high dust and high humidity environments.
Multiple output modesSupports normally open and normally closed contact outputs, making it easy to integrate with different types of industrial control systems.
Easy to install and maintainCompact design, easy installation, simple daily maintenance, can greatly reduce maintenance costs and time.
Technical parameters:
working principle:The NKPK-10-45 belt deviation switch monitors the running status of the belt in real time through a built-in sensor. When the belt deviates from the normal operating range, the switch will trigger a preset alarm or control signal. The dual level alarm mechanism of the equipment can emit different signals at different degrees of offset, in order to take timely measures and avoid further damage to the equipment.
Application scenarios:
Installation and maintenance:
Installation locationNKPK-10-45 should be installed at key monitoring positions on the belt conveyor, such as on both sides or in the middle section, to ensure effective detection of belt deviation.
Wiring debuggingConnect the wires correctly according to the product manual, ensuring that the power and signal lines are connected correctly. After installation, conduct debugging to check if the device's functions are normal, including whether the triggering of alarms and control signals meets the set requirements.
Regular inspectionRegularly check the operation status of the equipment, especially when used in high dust or high humidity environments, pay attention to the maintenance and upkeep of the equipment.
Cleaning and maintenanceRegularly clean the surface of the equipment to prevent the accumulation of dust and dirt. It is recommended to conduct a comprehensive functional test every six months to ensure the normal operation of the equipment.
Safety precautions:
Summary:The NKPK-10-45 belt deviation switch is a high-performance and comprehensive monitoring device with high-precision detection and dual level alarm functions. Its IP65 protection level and durable design enable it to operate stably in harsh environments, making it an important equipment for ensuring the safety of belt conveyor systems.
1. How can the dual level alarm function of NKPK-10-45 belt deviation switch improve the safety of the system?
The dual level alarm function of NKPK-10-45 can issue different levels of alarms when the belt deviates slightly or severely. This mechanism allows the system to issue warnings in the early stages of offset, prompting operators to make adjustments, thereby avoiding small problems from becoming major failures. When the offset reaches a severe level, the device will trigger a shutdown signal, automatically stopping operation to prevent further damage. In this way, the system can respond to different degrees of offset in a timely manner, improving overall security and system stability.
2. What impact does the protection level IP65 of NKPK-10-45 belt deviation switch have on the application of the equipment?
The IP65 protection level of NKPK-10-45 indicates that the equipment has high dust and water resistance, and can operate stably in dusty and humid environments. The IP65 protection level can effectively prevent dust intrusion and withstand the impact of jet water flow in a short period of time. This makes the equipment suitable for harsh working environments such as mines, chemical plants, etc., reducing the risk of failures caused by environmental factors and improving the durability and long-term reliability of the equipment.
3. What should be noted during the installation and maintenance of the NKPK-10-45 belt deviation switch?
When installing and maintaining the NKPK-10-45 belt deviation switch, the following precautions should be taken:
Installation position: Ensure that the equipment is installed at the key monitoring position of the belt, such as on both sides or in the middle section, to effectively detect the deviation of the belt.
Power off operation: During installation and debugging, be sure to turn off the power to avoid the risk of electric shock.
Accurate wiring: Connect the wires correctly according to the instructions to ensure that the power and signal lines are connected correctly, avoiding equipment failures caused by wiring problems.
Regular maintenance: Regularly check the operating status of the equipment, clean the surface of the equipment, and prevent the accumulation of dust and dirt. It is recommended to conduct a functional test every six months to ensure the normal operation of the equipment.
Environmental adaptation: When used in extreme environments, consider adding additional protective measures such as extra protective covers or increased cleaning frequency to extend the lifespan of the equipment.
