Product Overview:
The deviation switch GRB-13887 is a safety monitoring device used in conveyor belt systems, designed specifically to prevent equipment damage and production accidents caused by belt deviation. When the conveyor belt deviates from its normal operating trajectory, the equipment will issue a warning or stop signal to ensure the safety and stability of the production process. This product is widely used in coal mining, metallurgy, chemical industry, power and other fields, and can operate reliably in complex industrial environments.
Main functions:
- Real time monitoring:High sensitivity sensors can monitor the running status of the conveyor belt in real time and send signals in a timely manner when deviation is detected.
- Warning and shutdown functions:GRB-13887 has dual functions of warning and shutdown, ensuring timely warning in case of slight deviation of the conveyor belt and automatic shutdown in case of severe deviation, preventing the accident from escalating.
- Automatic reset:After the conveyor belt returns to its normal position, the deviation switch GRB-13887 will automatically reset without manual intervention, ensuring the continuous operation of the system.
- durable:The equipment casing is made of high-strength materials, which have the characteristics of corrosion resistance and impact resistance, and are suitable for various harsh industrial environments.
- Signal output:Provide switch output to facilitate integration with other safety monitoring systems and improve the automation level of the entire system.
Technical parameters:
- model:GRB-13887
- Working voltage:AC220V/380V
- Working temperature:-25 ℃ to+75 ℃
- Warning angle: 10°
- Shutdown angle: 30°
- Contact capacity:5A/250VAC
- Shell material:Cast aluminum alloy
- Protection level:IP66
- Installation method:Fixed installation with adjustable bracket
Installation and usage instructions:
- Installation location:The deviation switch GRB-13887 should be installed on the return side of the conveyor belt and kept away from strong vibration sources as much as possible. The installation height should be moderate to ensure that the sensor can accurately detect the offset of the conveyor belt.
- Wiring requirements:Follow the wiring diagram of the equipment to ensure that the power and signal lines are connected correctly and securely. Cut off the power supply during installation to ensure safety.
- Debugging steps:After installation, manually simulate the deviation state and check whether the warning and shutdown functions of the equipment are normal. Adjust the sensitivity of the detection rod to ensure that the device can accurately trigger signals within the set angle range.
Maintenance and upkeep:
- Regular inspection:It is recommended to check the working status of the deviation switch once a month, clean the dust and debris on the surface of the equipment, and ensure that its mechanical components operate well.
- Functional testing:Conduct functional testing once every quarter to ensure that the equipment can issue timely warnings or stop signals when the conveyor belt deviates, ensuring system safety.
- environmental protection:For equipment exposed to harsh environments for a long time, it is recommended to install protective covers to extend the service life of the equipment.
matters needing attention:
- Be sure to cut off the power supply during installation and maintenance to ensure safe operation.
- The installation, debugging, and maintenance of the equipment should be carried out by professionals to ensure its normal operation.
- If there are any abnormalities or malfunctions in the equipment, please contact technical support or suppliers in a timely manner for handling.
Application scenarios:The deviation switch GRB-13887 is suitable for various industrial conveyor belt systems, especially in industries such as coal mining, metallurgy, chemical engineering, and power. Through its precise monitoring and robust design, it provides reliable safety assurance for conveyor belt systems.
Summary:The deviation switch GRB-13887 is an important safety monitoring device for conveyor belt systems. Through real-time monitoring and automatic protection functions, it effectively prevents accidents caused by conveyor belt deviation. Its sturdy structural design and intelligent operation mode enable it to perform excellently in various complex industrial environments, ensuring the safety and stability of the production process.
Related Q&A FAQs:
1. What are the warning and shutdown angles of the deviation switch GRB-13887?
The warning angle of the deviation switch GRB-13887 is 10 °. When the conveyor belt deviates from the track by 10 °, the equipment will issue a warning signal. The shutdown angle is 30 °. When the deviation angle reaches or exceeds 30 °, the equipment will trigger a shutdown signal to prevent equipment damage and production accidents.
2. What industries and environments is the deviation switch GRB-13887 suitable for?
The deviation switch GRB-13887 is widely used in conveyor belt systems in industries such as coal mining, metallurgy, chemical engineering, and power. Due to its excellent corrosion resistance and impact resistance, the shell material is suitable for use in various harsh industrial environments. Its protection level is IP66, which can effectively prevent the intrusion of dust and water, ensuring the long-term stable operation of the equipment.
3. How to correctly install the deviation switch GRB-13887?
When installing the deviation switch GRB-13887, it is recommended to fix it on the return side of the conveyor belt and maintain an appropriate distance from the edge of the conveyor belt. Ensure that the switch is kept away from strong vibration sources during installation. When wiring, connect correctly according to the wiring diagram to ensure the stability of the power and signal lines. Be sure to disconnect the power supply before installation and debugging to ensure safe operation.
