Product Description of Leather Motor Deviation Switch HFKPT2-1

Product Overview:The HFKPT2-1 leather motor deviation switch is a safety monitoring device designed specifically for belt motors, used to detect in real-time whether the belt deviates during operation. This switch has high sensitivity and reliability, and can immediately issue an alarm signal when the belt deviates, preventing equipment damage and production interruption. HFKPT2-1 is suitable for various industrial belt conveyor systems, such as mining, chemical plants, and food processing industries.

Main features:

1. High sensitivity detectionBuilt in precision sensors can monitor the deviation of the belt in real time and accurately trigger alarm signals, so as to take timely measures to correct problems.

2. Durable designMade of high-strength and durable materials, the shell has good dustproof and waterproof performance, suitable for use in harsh industrial environments.

3. extensive useSuitable for various belt motor systems, able to adapt to different industrial application environments and provide reliable safety protection.

4. Easy to installCompact design, supporting multiple installation methods, equipped with detailed installation and debugging instructions for quick configuration and maintenance.

Technical parameters:

• working voltage：AC 220V / 380V
• Working current：5A
• Detection angle：±15°
• response time:<1 second
• working temperature: -20 ° C to+60 ° C
• Protection level：IP65
• Shell materialHigh strength alloy material
• Output method: Normally open or normally closed contacts

working principle:The HFKPT2-1 deviation switch monitors the movement status of the belt through a built-in sensor. When the belt deviates and exceeds the set angle range, the switch will trigger an alarm signal. According to the set alarm mechanism, the device can issue corresponding warning signals when the belt deviates slightly or severely, thereby helping operators take timely corrective measures to prevent equipment damage and production interruption.

Application scenarios:

• Mining Conveyor System
• Chemical plant belt conveyor
• Food processing conveyor belt
• Other industrial belt motor systems

Installation and maintenance:

1. Installation location selectionInstall the HFKPT2-1 deviation switch in an area where the belt is prone to deviation, ensuring that the device can accurately monitor the deviation situation. During installation, keep the device parallel to the belt to ensure the accuracy of the detection.

2. Wiring and DebuggingConnect the power supply according to the wiring diagram in the product manual. After installation, debug and simulate the offset of the belt, check whether the alarm function of the switch is normal, and adjust the detection angle setting.

3. Regular maintenanceRegularly inspect the casing, sensors, and connecting wires of the switch to ensure that they are not damaged or loose. Clean the surface of the device to avoid dust and dirt affecting performance, especially in environments with high levels of dust, and increase maintenance frequency.

Safety precautions:

• During installation and maintenance, it is essential to cut off the power supply to prevent the risk of electric shock.
• When used in high load and harsh environments, pay attention to the sealing of the equipment to prevent external substances from affecting its performance.

Summary:The HFKPT2-1 leather motor deviation switch provides reliable assurance for the safe operation of belt motor systems due to its high sensitivity detection, durable design, and easy installation. Especially suitable for use in various industrial applications, effectively monitoring and preventing belt deviation, ensuring stable operation of equipment and production safety.

Related Q&A FAQs:

1. How to calibrate the detection angle of the HFKPT2-1 leather motor deviation switch?

Calibrating the detection angle of the HFKPT2-1 leather motor deviation switch usually involves adjusting the built-in sensors or mechanical components. According to the steps in the product manual, first set the correct belt installation position to ensure that the switch is parallel to the belt. Then, use the tool to adjust the detection angle of the switch to match the actual belt offset range. During the debugging process, the alarm function of the switch can be verified by simulating the offset of the belt, and further adjustments can be made as needed. It is recommended to calibrate under actual working conditions to ensure accuracy and reliability.

2. What are the maintenance recommendations for the HFKPT2-1 deviation switch in high dust environments?

Regular maintenance is particularly important when using the HFKPT2-1 deviation switch in high dust environments. It is recommended to regularly clean the surface of the switch and wipe it with a soft cloth to avoid dust accumulation that may affect equipment performance. Check the casing and sealing components of the switch to ensure no damage or aging, and prevent dust from infiltrating the interior. It is recommended to increase maintenance frequency in high dust environments, especially when equipment is running frequently. At the same time, ensure that the installation location and protective measures can effectively reduce the impact of dust on the equipment.

3. What does the protection level IP65 of HFKPT2-1 deviation switch mean?

The protection level of IP65 indicates that the HFKPT2-1 deviation switch has good dust and water resistance performance. Specifically, an IP65 rating means that the device is completely dust-proof (dust level 5) and can withstand low-pressure water flow from any direction (waterproof level 6). This enables the equipment to operate stably in dusty and humid industrial environments, avoiding the influence of external substances on internal components and ensuring the long-term reliability of the equipment.