Product Overview
The 3EPK-12-30 deviation switch is a critical protective device used in belt conveyor systems, specifically designed to detect and alert the deviation status of the conveyor belt. This switch accurately monitors the movement status of the conveyor belt, and can promptly issue an alarm or take shutdown measures when the conveyor belt deviates, effectively preventing damage to the conveyor belt and related equipment. Suitable for various industrial fields such as mining, metallurgy, electricity, chemical industry, ports, etc.
Product Features
- High precision detection3EPK-12-30 has high-precision deviation detection capability, which can monitor small deviations of the conveyor belt in real time to ensure system safety.
- Adjustable action angleThe standard action angle is 12 °, and the reset angle is 30 °. Users can adjust it according to their actual application needs to improve adaptability.
- Strong durabilityMade of corrosion-resistant and high-strength materials, it has excellent wear resistance and can adapt to various harsh environments.
- High protection levelEquipped with IP65 protection level, it effectively prevents dust and water, ensuring long-term stable operation of the equipment in humid or dusty environments.
- Automatic resetAfter the conveyor belt returns to normal, the switch automatically resets, reducing manual intervention and improving the system's operational efficiency.
technical parameter
- model›3EPK-12-30
- Action angle: 12 ° (adjustable)
- Reset angle：30°
- contact rating：AC 380V 5A
- Protection level：IP65
- working temperature-25 ℃ to+60 ℃
- texture of materialCast aluminum or stainless steel casing
- Installation methodFixed installation on both sides of the conveyor belt
- weightApproximately 3.2kg
working principle
The 3EPK-12-30 deviation switch is installed on both sides of the conveyor belt and uses built-in sensors to monitor the running status of the conveyor belt in real time. When the deviation angle of the conveyor belt reaches 12 °, the sensor will trigger an internal switch, issue an alarm signal or perform a shutdown operation. If the conveyor belt returns to its normal state, the switch will automatically reset without manual intervention, ensuring the stable operation of the system.
application area
- Mining industryUsed for monitoring the deviation of ore conveyor belts to avoid equipment damage and production interruption.
- Chemical industryProtect the conveyor belt in harsh chemical environments to prevent safety hazards caused by deviation.
- Power industryUsed to monitor coal conveyor belts, ensure normal system operation, and reduce failure rates.
- Ports and docksEnsure the stable operation of the bulk cargo conveyor belt and prevent equipment damage due to deviation.
Installation and Debugging
- Installation locationIt is recommended to install it at key parts of the conveyor belt, such as turning points or areas prone to deviation, to ensure that deviation is detected.
- Electrical connectionConnect the switch to the control system according to the electrical wiring diagram to ensure accurate signal transmission.
- Debugging stepsManually shift the conveyor belt, check the triggering and resetting of the switch, and ensure that it can work accurately within the set angle.
Maintenance and upkeep
- Regular inspectionRegularly inspect the sensors and contacts of the switch to ensure they are not worn or damaged.
- Cleaning treatmentKeep the equipment clean, especially the sensors and detection rods, to avoid dust or debris affecting the detection accuracy.
- Lubrication and maintenanceRegularly lubricate the moving parts to maintain their good flexibility and extend the service life of the equipment.
matters needing attention
- Stable installationEnsure that the installation position of the switch is stable and avoid affecting the detection effect due to vibration or impact.
- Fault handlingIf any malfunction is found, promptly inspect and replace damaged components to ensure the normal operation of the system.
epilogue
The 3EPK-12-30 deviation switch, with its high-precision detection, sturdy and durable design, and automatic reset function, has become an indispensable protective device in belt conveyor systems. Whether in the mining, chemical, or power industries, 3EPK-12-30 can effectively prevent deviation phenomena, ensure the safe operation of conveying equipment, and improve production efficiency.
Related Q&A FAQs:
1. What types of conveyor belts is the 3EPK-12-30 deviation switch suitable for?
The 3EPK-12-30 deviation switch is suitable for various belt conveyor systems, including mining, chemical, power and other industries. It can issue an alarm or shut down when the conveyor belt deviates, protecting the equipment from damage.
2. Can the action angle and reset angle of the deviation switch be adjusted?
Yes, the action angle of 3EPK-12-30 is 12 °, and the reset angle is 30 °. Users can adjust according to their actual needs to meet the requirements of different conveyor belt operating conditions.
3. What is the protection level of PP-K2-J? Is it suitable for outdoor use?
3EPK-12-30 has an IP65 protection rating and excellent dust and water resistance, making it suitable for use outdoors or in harsh environments such as humid and dusty workplaces.
