Deviation Switch TYPE ELAP-20 Product Description

Product Overview

The deviation switch TYPE ELAP-20 is a safety protection device used for conveyor belt systems. When the conveyor belt deviates from the normal track during operation, the equipment can detect it in a timely manner and issue an alarm signal or trigger a shutdown action to avoid equipment failure, production stoppage, and safety accidents caused by the deviation of the conveyor belt. ELAP-20 is designed to be sturdy, stable in performance, and adaptable to various industrial environments, ensuring the safe operation of belt conveyor systems.

Product Features

1. High sensitivity monitoringTYPE ELAP-20, with its precise mechanical structure, can quickly detect the offset of the conveyor belt and trigger a quick response.
2. Adapt to harsh environmentsThe shell is made of corrosion-resistant materials, which have strong impact resistance and are suitable for outdoor or humid, dusty environments.
3. Adjustable angleThe default detection angle is 20 °, which can be adjusted as needed to adapt to different working conditions.
4. High protection levelThe device has an IP65 protection level and can operate stably for a long time under various harsh conditions.
5. Automatic resetWhen the conveyor belt returns to its normal position, the switch automatically resets to ensure the continuous operation of the conveyor system.

technical parameter

• model›TYPE ELAP-20
• Action angle: 20 ° (adjustable)
• Reset angleAdjust according to the installation situation
• contact rating：AC 220V 5A
• Protection level：IP65
• texture of materialCast aluminum or stainless steel casing
• Supply voltage：AC/DC 24V、110V、220V（可选）
• working temperature-25 ℃ to+75 ℃
• Installation methodBolt fixed on both sides of the conveyor
• weightApproximately 3.5kg

working principle

The deviation switch TYPE ELAP-20 monitors the running status of the conveyor belt through the rollers in contact with the edge of the conveyor belt. When the conveyor belt deviates from its normal position and reaches the set 20 ° angle, the roller pushes the internal micro switch, emits an electrical signal, and triggers the shutdown or alarm program of the conveyor system. After the system returns to normal, the equipment will automatically reset and continue to monitor the operation of the conveyor belt.

Application scenarios

TYPE ELAP-20 is widely used in industrial sites such as mining, metallurgy, chemical engineering, and power plants, and is particularly suitable for working conditions where belt conveyor systems are prone to deviation. By installing a deviation switch, it can effectively prevent equipment damage or production line interruption caused by conveyor belt deviation, ensuring the smooth progress of the production process.

Installation and Debugging

1. Installation locationFix TYPE ELAP-20 near the edges on both sides of the conveyor belt, ensuring that the rollers are in contact with the conveyor belt. It is recommended to install it in key areas such as the front and rear areas of the drive drum.
2. Electrical connectionConnect the wires according to the voltage requirements, ensure that the electrical system is firmly connected, and set alarm or shutdown functions as needed.
3. Angle adjustmentAccording to the operating characteristics of the conveyor belt, the detection angle can be adjusted to ensure correct response when the offset reaches the set angle.
4. Debugging and inspectionAfter installation, conduct action testing to ensure that the switch can accurately respond to offset and issue alarm signals or shut down.

Maintenance and upkeep

1. Regular cleaningRegularly inspect and remove dust and debris from the equipment, especially the rollers and contact areas, to ensure sensitivity.
2. Electrical inspectionCheck the wiring section to prevent equipment failure caused by loose connections, and regularly check the working status of switch contacts.
3. Mechanical component maintenanceCheck the wear of the rollers and replace them in a timely manner to ensure the normal operation of the equipment.

epilogue

The deviation switch TYPE ELAP-20, with its high-precision detection and durability, can provide reliable safety assurance for industrial conveyor belt systems. It can not only prevent equipment failures caused by conveyor belt deviation, but also improve production safety and reduce downtime for enterprises, making it an ideal choice for ensuring stable operation of conveyor systems.

Related Q&A FAQs:

1. What is the working principle of the deviation switch TYPE ELAP-20?

TYPE ELAP-20 monitors the offset of the conveyor belt through rollers installed on both sides of the conveyor belt. When the offset angle of the conveyor belt reaches the set 20 °, the roller will trigger the internal micro switch, issuing a stop or alarm signal to prevent equipment damage or production line interruption. After the conveyor belt returns to normal, the switch will automatically reset.

2. What work environments is TYPE ELAP-20 suitable for?

TYPE ELAP-20 is designed to be sturdy and suitable for various industrial environments, including mining, metallurgy, chemical, and power plants. It has a high protection level (IP65) and can work stably in dusty, high humidity, or harsh weather conditions.

3. How to install and maintain TYPE ELAP-20?

During installation, fix TYPE ELAP-20 on both sides of the conveyor belt to ensure good contact between the rollers and the conveyor belt. Adjust the detection angle as needed to ensure accurate response to offset. In terms of maintenance, it is necessary to regularly clean the rollers and check the electrical connections to ensure the normal operation of the equipment, and replace the components in a timely manner when they wear out.