1. Product Overview
PP-K0206E two-stage deviation switch is an industrial grade equipment used for conveyor belt systems, designed to detect and prevent conveyor belt deviation or deviation from the normal operating path. This switch has a two-level detection function, which can promptly issue an alarm signal or take protective measures when the conveyor belt deviates slightly or severely, to ensure the safe operation of the equipment and extend the service life of the conveyor system.
2. main features
- Dual level detectionEquipped with two-level deviation detection function, it can accurately identify different degrees of deviation, provide early warnings, and trigger protective actions when necessary.
- high sensitivityHigh sensitivity sensors are used to ensure rapid response and accurate detection of conveyor belt deviation.
- Durable designThe sturdy structural design enables it to operate stably in harsh industrial environments, with strong anti-interference ability and adaptability to various conveyor belt working environments.
- Adjustment functionIt can be adjusted according to the width of the conveyor belt and specific application requirements to adapt to different specifications and types of conveyor belt systems.
- Easy to installEasy to install, supports multiple installation methods, and can be quickly integrated into existing conveyor systems.
3. technical parameter
- Testing methodTwo level detection (slight deviation alarm and severe deviation protection)
- working voltage: 24VDC/110VAC/220VAC (choose according to actual needs)
- contact rating：10A 250VAC/10A 30VDC
- Working temperature range-20 ℃ to+60 ℃
- Protection levelIP65, dustproof and waterproof
- Installation methodBracket installation, supports multi angle adjustment
4. application area
- Industrial conveying systemWidely used in conveyor belt systems in industries such as mining, metallurgy, coal, and electricity.
- Warehousing and LogisticsUsed for conveyor belt detection and protection in large warehousing and logistics centers.
- manufacturingSuitable for conveyor belt protection and fault warning on various production lines.
5. Operation and maintenance
- installAdjust the installation bracket of the switch according to the width and installation position requirements of the conveyor belt, and ensure that the contact surface between the sensor and the conveyor belt is parallel. After fixed installation, check if all connections are secure.
- adjustAdjust the sensitivity and alarm trigger point of the deviation switch according to the actual application situation to adapt to different operating conditions of the conveyor belt.
- testAfter installation, conduct system testing to ensure that the deviation switch can work properly and issue the correct signal under different deviation conditions.
- maintainRegularly check the working status of the equipment, clean the dust or dirt on the sensors and contact surfaces, and ensure the sensitivity and accuracy of the switches. If there is a malfunction, refer to the product manual for troubleshooting or contact professional technical support.
Related Q&A FAQs:
1. What does the two-stage detection of PP-K0206E deviation switch specifically refer to?
The two-stage detection of PP-K0206E includes a slight deviation alarm and a severe deviation protection. When the conveyor belt deviates slightly, the switch will issue an alarm signal; When the deviation situation becomes severe, the switch will trigger protective measures, such as stopping the conveyor belt or cutting off the power supply, to prevent equipment damage or safety accidents.
2. How to choose the appropriate working voltage?
Select the appropriate operating voltage based on the power configuration of the conveyor belt system. PP-K0206E supports different voltage levels such as 24VDC, 110VAC, and 220VAC. Usually, 24VDC is suitable for low voltage systems, while 110VAC and 220VAC are suitable for ordinary power systems. Please refer to the power configuration and actual requirements of the device when making a selection.
3. Is it necessary to adjust the deviation switch when the width of the fruit conveyor belt changes?
Yes, when the width of the conveyor belt changes, it is necessary to readjust the installation position of the deviation switch and the sensor docking position to ensure the detection effect. By adjusting the installation bracket and sensor position to match the width of the new conveyor belt, ensure the detection accuracy and response speed of the switch.
