Deviation switch SDM-T650AH is installed in pairs on both sides of the belt conveyor. Product description

Product Overview:SDM-T650AH deviation switch is a high-performance monitoring device designed specifically for belt conveyors, suitable for deviation detection in conveyor systems. This device is usually installed in pairs on both sides of the belt conveyor to ensure comprehensive monitoring of both sides of the belt. The SDM-T650AH deviation switch can detect the deviation of the belt in real time, issue alarm signals or trigger shutdown protection in a timely manner, ensuring the stability and safety of the conveyor system.

Main features:

1. Paired installationThe SDM-T650AH deviation switch is designed for paired use, with one side installed on the left side of the belt conveyor and the other side installed on the right side. It achieves comprehensive coverage through double-sided monitoring to ensure that any deviation of the belt is detected.

2. High sensitivity detectionEquipped with high-sensitivity sensors, it can accurately monitor the deviation of the belt, and even minor deviations can be detected in a timely manner.

3. Dual level alarm functionThe device has a two-level alarm function, which issues a warning when there is a slight deviation and automatically shuts down when there is a serious deviation, avoiding equipment damage and production interruption.

4. durableThe equipment casing is made of durable materials with strong impact and corrosion resistance, suitable for harsh industrial environments.

5. Protection levelHas certain waterproof and dustproof capabilities, ensuring stable operation in dusty or humid environments.

6. Easy to installPaired designed equipment is easy to install, compatible with different specifications of belt conveyors, and quickly integrated into existing systems.

Technical parameters:

• working voltage：AC 220V / 380V
• Rated current：10A
• Protection level：IP54
• Detection angleAdjustable from ± 15 ° to ± 30 °
• output signal: Normally open/normally closed contact signal
• ambient temperature: -20 ° C to+60 ° C
• Shell materialAluminum alloy or engineering plastic
• Installation methodWall mounted or device side fixed

working principle:

The SDM-T650AH deviation switch monitors the real-time running trajectory of the belt by installing two devices on each side of the belt conveyor. Each device can detect the deviation of the belt. When the belt deviates, the built-in sensor will capture the deviation angle and trigger an alarm or shutdown function through signal output. The dual level alarm system can issue a warning when the belt deviates slightly and automatically stop when it deviates severely, thereby protecting the conveyor system.

Application scenarios:

• miningBelt deviation monitoring for ore conveying systems to prevent equipment damage.
• metallurgySuitable for belt conveyor systems in high-temperature environments, ensuring stable operation.
• chemical industryMonitor the belt deviation during the transportation of chemical raw materials to ensure production safety.
• powerThe coal conveying system of the power plant is used for monitoring belt deviation to ensure the normal operation of the equipment.

Installation and maintenance:

1. Installation locationSDM-T650AH should be installed on both sides of the belt conveyor to ensure comprehensive monitoring of the belt. During installation, it is necessary to ensure that the equipment is parallel to the belt in order to accurately detect any deviation.

2. Wiring operationConnect the wires correctly according to the product manual to ensure stable electrical connections and stable signal transmission.

3. Adjust the detection angleAdjust the detection angle of each device according to the characteristics of belt operation to ensure the best monitoring effect.

4. Regular inspectionRegularly inspect the equipment to ensure that the sensors are working properly and the signal output is accurate.

5. Cleaning and maintenanceRegularly clean the surface of the equipment and the interior of the junction box to maintain stable equipment performance.

Safety precautions:

• When installing and maintaining equipment, be sure to disconnect the power to prevent the risk of electric shock.
• Ensure that the equipment is installed securely and avoid damage caused by vibration or impact.
• When used in extreme environments, additional protective measures may be required to extend the lifespan of the equipment.

Summary:The SDM-T650AH deviation switch is installed in pairs on both sides of the belt conveyor to achieve comprehensive deviation monitoring. Its high sensitivity detection and dual level alarm function can effectively ensure the stable operation of the belt conveyor system, prevent equipment failures and production interruptions caused by deviation.

Related Q&A FAQs:

1. How to adjust the detection angle of SDM-T650AH deviation switch to adapt to different belt widths?

Users may want to know how to adjust the detection angle of the equipment based on the actual width and operating status of the belt to ensure the best monitoring effect.

2. Does the paired installation of SDM-T650AH deviation switch require special accessories or tools?

Users may be concerned about whether additional accessories or tools are needed for the correct and stable installation of SDM-T650AH in pairs.

3. How to perform regular maintenance and troubleshooting of SDM-T650AH deviation switch?

Users may need to understand the regular maintenance requirements and common troubleshooting methods of the equipment to ensure long-term stable operation and timely handling of potential problems.