Product Description of Deviation Switch BXPLK-2

Product Overview

BXPLK-2 deviation switch is a safety monitoring device developed for conveyor belt systems, widely used in various industrial sites to detect whether the conveyor belt has deviated. Once the conveyor belt deviates from the normal track, the equipment will promptly issue a signal to avoid equipment damage and production safety accidents caused by deviation. This device has the characteristics of simple structure, high detection accuracy, and fast response speed, and is suitable for use in complex environments.

Product Features

1. High sensitivity detectionThe BXPLK-2 deviation switch can accurately detect the deviation status of the conveyor belt, preventing damage and shutdown accidents caused by deviation of the conveyor belt.
2. durableThe equipment casing is made of high-strength materials, which have good wear resistance and corrosion resistance, and are suitable for harsh industrial environments.
3. Easy to operateThe installation and debugging of this device are simple and convenient, equipped with adjustable detection angles, which can meet the needs of different conveying systems.
4. Real time monitoringBXPLK-2 can monitor the conveyor belt system in real-time for 24 hours, and immediately issue an alarm signal in case of deviation to ensure production safety.
5. Multi environmental adaptabilitySuitable for conveyor belt systems in industries such as coal mining, power, chemical, and metallurgy, especially in high dust and high humidity working environments.

technical parameter

• modelBXPLK-2
• Detection angle: 15 ° to 30 ° (adjustable)
• contact rating: AC 380V 5A
• Protection level: IP65
• working temperature-30 ℃ to+70 ℃
• Shell materialCast aluminum alloy
• weight: 3kg
• Action torque: 10N·m
• response time:<2 seconds

working principle

When the conveyor belt deviates, the sensor device of BXPLK-2 will sense the degree of deviation of the conveyor belt. When it exceeds the set angle, the switch will immediately trigger and send an electrical signal to the control system, prompting the staff to check or automatically stop the operation of the conveyor belt. The entire process is sensitive and rapid, ensuring that the conveying system can be adjusted in a timely manner to prevent further damage.

application area

• miningConveyor belt systems used in industries such as coal mines and metal mines to prevent safety accidents caused by deviation.
• Power industrySuitable for fuel and coal transportation systems in power plants.
• Chemical industryUsed for conveying chemical materials, especially to ensure system safety in high-risk environments.
• Metallurgical industryEnsure the stability of material transportation in metallurgical industries such as steel and aluminum.

Installation and Debugging

1. Installation locationUsually installed at key points on both sides of the conveyor belt, such as the head, tail, and corners, to ensure sufficient monitoring at each critical position.
2. Angle adjustmentAdjust the detection angle of the equipment based on the characteristics and possible deviation range of the conveyor belt to ensure that the sensitivity meets the system requirements.
3. Wiring requirementsFollow the wiring diagram in the equipment manual to ensure correct electrical connections.
4. Debugging and testingAfter installation, debug and test the sensitivity of the switch when the conveyor belt deviates to ensure timely signal transmission.

Maintenance and upkeep

1. Regular inspectionRegularly test the operation of the equipment to ensure the flexibility of the detection arm and the normal working state of the switch.
2. Cleaning equipmentRegularly remove dust and dirt from the equipment, especially in high dust environments, to maintain the sensitivity of the equipment.
3. Lubrication and maintenanceProperly lubricate the transmission components to ensure flexible operation and extend the service life of the equipment.

matters needing attention

• Stable installationDuring installation, it is necessary to ensure that the equipment is firmly fixed to avoid displacement or inaccurate detection caused by vibration.
• Environmental adaptationAvoid exposing the equipment to extreme environments such as high temperatures or strong corrosive environments to ensure its service life.
• Regular calibrationAfter prolonged use, it is necessary to regularly calibrate the detection angle and sensitivity to ensure that the equipment remains in an efficient state at all times.

epilogue

The BXPLK-2 deviation switch, with its high precision and reliability, has become an ideal choice for safety monitoring of conveyor belt systems. It can effectively avoid unexpected shutdowns and equipment damage caused by conveyor belt deviation, and has been widely used in industries such as mining, metallurgy, power, and chemical. Through regular maintenance and proper use, this equipment will provide long-term and reliable safety assurance for the conveying system.

Related Q&A FAQs:

1. What is the working principle of BXPLK-2 deviation switch?

BXPLK-2 detects the deviation of the conveyor belt through sensors. When the conveyor belt deviates from the normal track and exceeds the set angle, the equipment will trigger and send a signal to prompt the operator to intervene or automatically stop the operation of the conveyor belt.

2. How to adjust the detection angle of the deviation switch?

The detection angle of BXPLK-2 can be adjusted between 15 ° and 30 °. Users can adjust the detection angle on the equipment according to the needs of the conveyor belt system to ensure optimal sensitivity.

3. What industries is BXPLK-2 suitable for?

BXPLK-2 is widely used in industries such as mining, power, chemical, and metallurgy, and is particularly suitable for working environments with high dust, high humidity, or explosion risks.