Product Overview:
The deviation switch GHPK-12-30 is a safety monitoring device used in conveyor belt systems, designed to detect the deviation phenomenon of conveyor belts in real time. This equipment can issue warning signals or trigger shutdown when the conveyor belt deviates from the normal track to protect the safety of the equipment and production process. GHPK-12-30 is widely used in industries such as coal mining, metallurgy, chemical engineering, and power, and is suitable for use in various industrial environments.
Main functions:
- Deviation monitoring:GHPK-12-30 is equipped with a high-sensitivity sensor that can monitor the offset status of the conveyor belt in real time.
- Warning and shutdown functions:When the deviation angle of the conveyor belt reaches 12 °, the equipment will issue a warning signal; When the offset angle reaches 30 °, the equipment will automatically trigger a shutdown signal to prevent equipment damage.
- Automatic reset:The equipment has an automatic reset function. When the conveyor belt returns to its normal position, the equipment will automatically reset without manual intervention.
- Durable design:Made of high-strength materials, the shell has excellent corrosion resistance and impact resistance, suitable for harsh environments.
- Signal output:Provide switch output for easy integration with other monitoring systems, improving system automation and safety.
Technical parameters:
- model:GHPK-12-30
- Working voltage:AC220V/380V
- Working temperature:-20 ℃ to+60 ℃
- Warning angle: 12°
- Shutdown angle: 30°
- Contact capacity:5A/250VAC
- Shell material:Cast aluminum alloy or engineering plastic
- Protection level:IP65
- Installation method:Fixed installation, equipped with adjustable bracket
Installation and usage instructions:
- Installation location:Install the deviation switch GHPK-12-30 on the return side of the conveyor belt, ensuring that the equipment is at an appropriate distance from the edge of the conveyor belt to accurately monitor the deviation of the conveyor belt.
- Wiring requirements:Connect the power and signal lines according to the device's wiring diagram to ensure a secure and reliable connection. During the installation process, it is essential to disconnect the power to ensure safety.
- Debugging steps:After installation, check whether the warning and shutdown functions of the equipment are working properly by simulating the deviation state. Adjust the sensitivity of the detection rod as needed to ensure that the device can accurately trigger signals within the set angle range.
Maintenance and upkeep:
- Regular inspection:Check the working status of the deviation switch GHPK-12-30 every month, clean the dust and debris on the surface of the equipment, and ensure the normal operation of the mechanical parts.
- Functional testing:Conduct a functional test once every quarter to verify whether the equipment can issue a warning or trigger a shutdown signal in a timely manner when the conveyor belt deviates.
- environmental protection:For equipment exposed to harsh environments for a long time, it is recommended to install protective covers to extend the service life of the equipment.
matters needing attention:
- Be sure to cut off the power supply during installation and maintenance to ensure safe operation.
- The installation, debugging, and maintenance of the equipment should be carried out by professionals to ensure its normal operation.
- When the equipment encounters abnormalities or malfunctions, please contact technical support or suppliers in a timely manner for inspection and maintenance.
Application scenarios:The deviation switch GHPK-12-30 is widely used in conveyor belt systems in industries such as coal mining, metallurgy, chemical engineering, and power. Its precise deviation detection and sturdy and durable design make it perform well in various complex industrial environments, providing reliable safety guarantees for conveyor belt systems.
Summary:The deviation switch GHPK-12-30 is a key equipment to ensure the safety of the conveyor belt system. It prevents equipment failures and safety accidents caused by conveyor belt deviation through efficient monitoring and protection functions. Its robust design and intelligent operating mode enable it to work stably and reliably in various industrial environments, providing guarantees for the safety and stability of the production process.
Related Q&A FAQs:
1. What industries and environments is the GHPK-12-30 deviation switch suitable for?
The deviation switch GHPK-12-30 is suitable for conveyor belt systems in industries such as coal mining, metallurgy, chemical engineering, and power. Due to its excellent corrosion resistance and impact resistance, as well as a protection level of IP65, it can effectively resist the intrusion of dust and moisture, making it very suitable for use in various harsh industrial environments.
2. Does the deviation switch GHPK-12-30 have an automatic reset function?
Yes, the deviation switch GHPK-12-30 has an automatic reset function. When the conveyor belt returns to normal operation, the equipment will automatically reset without manual intervention. This feature helps improve the automation level of the system, reduce maintenance workload, and maintain equipment stability.
3. What are the warning and shutdown angles for the deviation switch GHPK-12-30?
The warning angle of the deviation switch GHPK-12-30 is 12 °. When the deviation of the conveyor belt reaches 12 °, the equipment will issue a warning signal to alert the operator. The shutdown angle is 30 °. When the deviation of the conveyor belt reaches or exceeds 30 °, the equipment will automatically trigger a shutdown signal to prevent further equipment damage and safety accidents.
