Product Overview:
The deviation switch GRB-14045-II is a safety protection device used to monitor the deviation of conveyor belts. It detects the offset angle of the conveyor belt and promptly issues warning or shutdown signals to prevent equipment damage or production accidents caused by belt deviation, ensuring the normal operation of the conveyor system. This device is particularly suitable for various transportation systems in industries such as coal mining, steel, chemical, and power.
Main functions:
- Deviation monitoring:Using high-precision sensors to monitor the operating status of the conveyor belt in real time, an alarm or shutdown signal is immediately issued when the belt deviates.
- Multi angle response:GRB-14045-II is equipped with a 14 ° warning angle and a 45 ° shutdown angle. When the conveyor belt deviates beyond these two angles, warning and shutdown signals are issued respectively.
- durable:The equipment is made of high-strength materials, which have good impact resistance and corrosion resistance, and can work stably in harsh environments for a long time.
- Automatic reset:After the conveyor belt returns to its normal running trajectory, the switch can automatically reset without manual intervention.
- Output signal:Provide switch output for easy integration with other monitoring systems.
Technical parameters:
- model:GRB-14045-II
- Working voltage:AC220V/380V
- Working temperature: -30℃~+70℃
- Warning angle: 14°
- Shutdown angle: 45°
- Contact capacity:5A/250VAC
- Shell material:Cast aluminum alloy or stainless steel
- Protection level:IP65
- Installation method:Fixed installation with mounting bracket attached
Installation and usage instructions:
- Installation location selection:It is recommended to install the deviation switch GRB-14045-II on the return side of the conveyor belt, away from strong vibration sources, to ensure the sensitivity and reliability of the switch. The installation height should be kept at an appropriate distance from the edge of the belt to avoid accidentally touching the switch during normal belt operation.
- Wiring connection:Connect the power and signal lines correctly according to the wiring diagram, ensuring that the wiring is secure and complies with safety regulations. It is recommended to disconnect the power supply during installation to ensure safe operation.
- Debugging steps:After installation, manually move the detection lever to check if the warning and shutdown functions of the switch are working properly. If necessary, appropriate adjustments can be made.
Maintenance and upkeep:
- Regular inspection:It is recommended to check the deviation switch GRB-14045-II every month to ensure that the mechanical part is flexible and free of jamming, and to clean the surface of dust and debris.
- Functional testing:Conduct functional testing once every quarter to ensure that the equipment can respond promptly to belt deviation and prevent system failures.
- Environmental protection:In particularly harsh working environments, it is recommended to install protective covers to reduce the time equipment is exposed to harsh conditions and extend its service life.
matters needing attention:
- Be sure to cut off the power supply during installation and maintenance to ensure safe operation.
- Equipment installation and debugging should be completed by professional technicians to ensure the normal operation of the equipment.
- It is not recommended for users to disassemble the equipment themselves. If maintenance is needed, they should contact professionals or equipment suppliers.
Application scenarios:The deviation switch GRB-14045-II is suitable for various conveyor belt systems, especially performing well in conveyor belt monitoring in industries such as coal mining, steel, chemical, and power. Its precise monitoring capability and robust design enable it to work stably for a long time in harsh industrial environments, ensuring the safety and efficiency of the conveying system.
Summary:The deviation switch GRB-14045-II is an indispensable safety monitoring device for conveyor belt systems. With its precise deviation detection, high durability, and automatic reset function, GRB-14045-II can provide reliable protection in various industrial environments, ensuring the continuous and stable operation of the conveying system.
Related Q&A FAQs:
1. How to correctly install the deviation switch GRB-14045-II?
During installation, the deviation switch GRB-14045-II should be fixed on the return side of the conveyor belt, ensuring that its installation position is away from strong vibration sources and at an appropriate distance from the edge of the belt. When wiring, correct connections should be made according to the wiring diagram to ensure good contact between the power and signal lines. Installation and debugging should be completed by professional technicians.
2. How often does the deviation switch GRB-14045-II need maintenance?
It is recommended to check the deviation switch GRB-14045-II every month to ensure that the mechanical components are functioning properly and to clean the dust and debris on the surface of the equipment. In addition, a functional test should be conducted quarterly to ensure that the equipment can respond normally when the conveyor belt deviates.
3. What is the material of the housing of the deviation switch GRB-14045-II? What is its protection level?
The housing material of the deviation switch GRB-14045-II is made of cast aluminum alloy or stainless steel, which has good corrosion resistance and impact resistance, and is suitable for use in harsh environments. Its protection level is IP65, which can effectively prevent the intrusion of dust and water, ensuring the long-term stable operation of the equipment.
