Deviation Switch KGE17 Mining Deviation Sensor Product Description

Product Overview:

The KGE17 mining deviation sensor is designed specifically for conveyor belt systems in mining environments, which can effectively monitor the deviation of the conveyor belt, ensure the normal operation of the equipment, and prevent faults or accidents caused by deviation. This sensor is suitable for transportation systems in coal mines, metal mines, and other mineral resources.

Main parameters:

• model:KGE17
• DesignMining deviation sensor
• structure sizeThe specific size is designed according to the actual model, usually in a long strip structure, which is easy to install on the side of the conveyor belt.
• Rated switch distanceAccording to the sensor design, it is usually 30 mm or 50 mm.
• working voltage12V or 24V DC, suitable for mining power systems.
• Switch output: Normally open (NO) or normally closed (NC) output, supporting PNP or NPN output forms.
• working temperature-20 ℃ to+60 ℃, suitable for temperature fluctuations in mining environments.
• Protection levelIP65 or higher, dustproof and waterproof, suitable for harsh mining environments.
• Material ScienceThe shell material is usually wear-resistant metal or engineering plastic, durable and able to withstand the impact of mining environment.

Function and Features:

1. Mining designSpecially designed for conveyor belt systems in mining areas, capable of stable operation in harsh mining environments.
2. Accurate detectionReal time monitoring of conveyor belt deviation to ensure timely detection and handling of deviation issues.
3. Reliable alarmBuilt in alarm function, when deviation is detected, the operator can be alerted through sound or light alarm system.
4. Strong durabilityUsing high-strength materials that can withstand vibrations, impacts, and corrosion in mining environments.
5. Adjustment functionAllow users to adjust the detection sensitivity and sensing range according to their actual needs to adapt to different conveyor belt systems.

Related Q&A FAQs:

1. How to install KGE17 mining deviation sensor?

The KGE17 sensor is usually installed on the side or bracket of the conveyor belt to ensure that the sensing surface is aligned with the deviation area of the conveyor belt. During installation, it is necessary to ensure that the sensor is securely fixed and that the power and signal lines are connected correctly. Please refer to the installation instructions in the product manual for specific installation methods.

2. How can the switch output of KGE17 sensor be configured?

The KGE17 sensor provides normally open (NO) and normally closed (NC) output options, allowing for the selection of appropriate output forms based on actual needs. The output of the sensor can be connected to the alarm system or automatic control system to issue an alarm or take corresponding measures when deviation occurs.

3. How to troubleshoot if the KGE17 sensor malfunctions during operation?

If the KGE17 sensor malfunctions, the following steps can be taken to troubleshoot:

Check the power connection to ensure that the voltage meets the requirements.
Check the installation position and angle of the sensor to ensure correct alignment with the conveyor belt.
Check if the sensing surface of the sensor is obstructed by dirt or foreign objects.
Check if the connection between the signal output line and the control system is normal.
If necessary, please refer to the product manual for further fault diagnosis or contact technical support for assistance.