Deviation switch YG12-830-35 Product introduction

Product Overview:YG12-830-35 deviation switch is a high-performance industrial equipment mainly used for monitoring and controlling belt deviation in belt conveyor systems. This switch is designed for high load and complex environments, and can monitor the running status of the belt in real time to prevent equipment failure and production interruption caused by belt deviation.

Main features:

1. High precision monitoringYG12-830-35 adopts advanced sensing technology and has high-precision offset detection capability. It can monitor the deviation of the belt in real time and issue an alarm signal when the deviation exceeds the set value.

2. durableThe casing of this switch is made of high-strength materials, which have excellent impact resistance and wear resistance, and are suitable for use in high loads and harsh environments.

3. Protection levelYG12-830-35 has a high level of protection, which can effectively prevent the intrusion of dust and moisture, ensuring stable operation of the equipment in various environments.

4. Easy to installThis switch is designed for easy installation and can be adjusted in position and angle according to actual needs. It is suitable for various belt conveyor systems and compatible with multiple control systems.

5. Adjustable alarm settingsUsers can set alarm thresholds based on specific application requirements to ensure that the switch can issue alarms at the most appropriate time and promptly address belt offset issues.

Technical parameters:

• working voltage：AC 220V / 380V
• Detection range：±30°
• output signal: Normally open/normally closed contacts
• response time:<1 second
• working temperature: -20 ° C to+60 ° C
• Protection level：IP65
• Shell materialHigh strength alloy material
• Installation methodAdjustable pole installation

working principle:

YG12-830-35 detects the movement status of the belt through its built-in sensors. When the belt deviates, the sensor will detect the change and trigger an alarm signal. The switch is equipped with an adjustment function, allowing users to adjust the offset threshold according to their actual needs, ensuring that an alarm is triggered when the belt offset reaches the set value, thereby preventing equipment damage and production interruption.

Application scenarios:

• Mining and metallurgical industry
• chemical plant
• Power plant
• Ports and storage facilities
• Other belt conveyor systems

Installation and maintenance:

1. Installation locationAccording to the specific layout of the belt conveyor system, install YG12-830-35 in the appropriate position to ensure effective monitoring of the belt's offset status.

2. Wiring debuggingConnect the wires correctly according to the product manual and debug them to ensure that the switch functions properly, including triggering alarm signals and compatibility with the control system.

3. Regular inspectionRegularly check the working status of equipment, especially when used in high load and harsh environments, pay attention to checking and maintaining the performance of switches.

4. Cleaning and maintenanceRegularly clean the surface of the switch to prevent dust and dirt from affecting equipment performance. It is recommended to conduct a comprehensive functional test every six months to ensure the normal operation of the equipment.

Safety precautions:

• During installation and maintenance, it is essential to disconnect the power supply to prevent the risk of electric shock.
• Ensure that the equipment is installed securely and avoid loosening or damage caused by vibration or external forces.
• When used in extreme environments, additional protective measures can be considered to extend the lifespan of the equipment.

Summary:YG12-830-35 deviation switch is a belt conveying system protection device with advanced design and reliable performance, which can effectively monitor and control the deviation of the belt in various industrial environments to ensure the safe and stable operation of the equipment.

Related Q&A FAQs:

1. What specific protections can the YG12-830-35 deviation switch provide with a protection level of IP65?

The IP65 protection level indicates that YG12-830-35 has the following protection capabilities:

Dust prevention: The device completely prevents dust from entering, ensuring that internal components are not affected in high dust environments.
Waterproof: able to withstand strong water flow impacts from any direction, suitable for use in damp or splashed environments. This protective capability helps to maintain the normal operation of equipment and reduce malfunctions caused by external environments.

2. How to adjust the alarm threshold of YG12-830-35 deviation switch to adapt to different belt conveyor systems?

Adjusting the alarm threshold of YG12-830-35 can usually be done through the following steps:

Refer to the instruction manual: First, consult the product manual to understand the specific adjustment methods and requirements of the equipment.
Adjust screws or knobs: According to the instructions in the manual, use the adjustment screws or knobs to set the desired offset threshold.
Testing and Validation: After completing the adjustments, conduct testing to verify whether the alarm threshold settings meet actual requirements. Ensure that the alarm function can be triggered normally when the belt deviates within the set range.

3. What industrial environments is the YG12-830-35 deviation switch suitable for, and how durable is it?

YG12-830-35 deviation switch is suitable for various industrial environments, including:

Mining and metallurgical industries: able to work stably in high load and dusty environments.
Chemical plant: It has anti-corrosion properties and is suitable for chemical environments.
Power plants and port facilities: suitable for places such as power production and material loading and unloading.