Deviation Switch JOEP-DZ Product Description

Product Overview

JOEP-DZ deviation switch is an industrial equipment used to monitor whether there is deviation during the operation of belt conveyors. It can promptly issue an alarm signal or perform a shutdown operation when the conveyor belt deviates from the normal trajectory to ensure the safe operation of the conveyor system. This equipment is particularly suitable for industries such as mining, metallurgy, chemical engineering, and power plants that require long-term stable operation.

Product Features

1. high sensitivityThe JOEP-DZ deviation switch is equipped with a high-sensitivity sensor that can quickly detect subtle deviations in the conveyor belt and make quick responses.
2. Bidirectional detection functionThe equipment can simultaneously detect the left and right sides of the conveyor belt, effectively preventing damage caused by one-sided deviation.
3. durableThe shell is made of high-strength materials that are impact resistant and corrosion-resistant, suitable for long-term use in harsh industrial environments.
4. Flexible adjustmentUsers can adjust the action angle according to on-site needs to ensure that the equipment can be triggered according to specific working conditions.
5. Automatic reset functionWhen the conveyor belt returns to its normal position, the JOEP-DZ switch can automatically reset, reducing the need for manual intervention.

technical parameter

• modelJOEP-DZ
• Action angle: 10 ° to 30 ° (adjustable)
• contact rating：AC 250V 5A
• Protection level：IP65
• working temperature-20 ℃ to+70 ℃
• Shell material: Cast aluminum
• weightApproximately 3.5kg

working principle

The JOEP-DZ deviation switch monitors the deviation of the conveyor belt. When the deviation of the conveyor belt exceeds the set angle, the internal sensor will trigger a signal and issue an alarm or stop command to the control system. The installation position of this switch is usually in places where deviation is prone to occur, such as the head, tail, or turning of the conveyor, to ensure the safe and stable operation of the conveying system.

application area

• Coal mining industryPrevent coal spillage and equipment damage caused by conveyor belt deviation.
• Metallurgical industryMonitor the offset issue during the transportation of materials such as ore and steel.
• Power plantEnsure the normal operation of the coal conveying system conveyor belt to avoid accidents.
• Chemical industryPrevent safety hazards caused by deviation during the transportation of hazardous materials.

Installation and Debugging

1. Installation location selectionThe JOEP-DZ deviation switch should be installed at key nodes of the conveyor belt, such as corners and ends, in order to detect obvious deviation phenomena.
2. Electrical wiringConnect to the control system correctly according to the equipment wiring diagram to ensure timely signal reception and processing.
3. Action angle debuggingAccording to the specific operation of the conveyor belt, by adjusting the action angle of the switch, ensure that the alarm can be accurately triggered at the appropriate offset angle.

Maintenance and upkeep

1. Regular inspectionRegularly inspect the mechanical structure and electrical circuits of the equipment to ensure that sensors and contacts are in good working condition.
2. Cleaning equipmentTimely clean the dust and impurities outside the equipment to prevent affecting its sensitivity and operational stability.
3. Lubricating componentsRegularly lubricate movable components to ensure that the equipment remains sensitive and reliable even during long-term operation.

matters needing attention

• Protective measuresWhen used in dusty and high humidity environments, additional protective measures should be taken to ensure long-term stable operation of the equipment.
• Stable installationEnsure that the equipment is securely installed to avoid displacement or damage caused by vibration or impact.

epilogue

The JOEP-DZ deviation switch has become an indispensable safety monitoring device in industrial conveying systems due to its high sensitivity and durability. Its features of bidirectional detection, automatic reset, and flexible adjustment can effectively ensure the safe operation of belt conveyors, avoiding equipment damage and production accidents caused by deviation.

Related Q&A FAQs:

1. How to adjust the action angle of JOEP-DZ deviation switch?

Users can set the action angle within the range of 10 ° to 30 ° by adjusting the adjustment bolt on the device, and the specific angle can be adjusted according to the actual operation of the conveyor belt.

2. What types of conveying systems is JOEP-DZ suitable for?

This deviation switch is suitable for various belt conveyors, especially in harsh environments such as coal mines, metallurgy, power plants, and chemical industries, and can maintain stable operation for a long time.

3. What is the protection level of the equipment?

The protection level of JOEP-DZ deviation switch is IP65, which can effectively prevent dust and water from entering, and is suitable for use outdoors and in high humidity environments.