Product Description of Deviation Switch JPK-10-45

Product Overview

JPK-10-45 deviation switch is a high-performance deviation detection device used in belt conveyor systems, designed specifically to prevent conveyor belt deviation. This device can monitor the movement status of the conveyor belt in real time, issue alarms or perform shutdown operations in a timely manner, thereby protecting the conveyor system and related equipment from damage. JPK-10-45 is suitable for conveyor belt systems in industries such as coal mining, power, metallurgy, and chemical engineering.

Product Features

1. High sensitivity detectionThe JPK-10-45 deviation switch adopts a high-sensitivity sensor, which can accurately detect small deviations of the conveyor belt and ensure timely response to deviation events.
2. Adjustable action angleThe action angle is 10 ° and the reset angle is 45 °. Users can adjust the angle according to their actual needs to adapt to different application environments.
3. durableMade of corrosion-resistant and high-strength materials, it has excellent wear resistance and can operate stably in harsh environments for a long time.
4. High protection levelEquipped with IP66 protection level, effectively dustproof and waterproof, suitable for use in dusty, high humidity or outdoor environments.
5. Automatic reset functionAfter the conveyor belt returns to normal, the switch will automatically reset without manual intervention, improving the reliability of the system.

technical parameter

• model:JPK-10-45
• Action angle: 10 ° (adjustable)
• Reset angle：45°
• contact rating：AC 250V 5A
• Protection level：IP66
• working temperature-20 ℃ to+60 ℃
• texture of materialCast aluminum or stainless steel casing
• Installation methodFixed installation on both sides of the conveyor belt
• weightApproximately 3.5kg

working principle

The JPK-10-45 deviation switch is installed on both sides of the conveyor belt and monitors the running status of the conveyor belt in real time through built-in sensors. When the deviation angle of the conveyor belt reaches 10 °, the sensor triggers the switch, sends an alarm signal or performs a shutdown operation. If the conveyor belt returns to normal, the switch will automatically reset without manual intervention, ensuring continuous and stable operation of the system.

application area

• Coal mining industryUsed to monitor the deviation of ore conveyor belts, prevent equipment damage and production interruption.
• Chemical industryProtect the conveyor belt system, especially during chemical processing and transportation, to prevent safety hazards caused by deviation.
• Power industryUsed for monitoring coal conveyor belts to ensure the normal operation of the system and reduce failure rates.
• Metallurgical industryEnsure the stability of raw material and product transportation, and prevent equipment failures caused by deviation.

Installation and Debugging

1. Installation locationIt is recommended to install it at key parts of the conveyor belt, such as corners or areas prone to deviation, to ensure effective monitoring of deviation phenomena.
2. Electrical connectionConnect the switch to the control system according to the electrical wiring diagram to ensure accurate signal transmission.
3. Debugging stepsManually shift the conveyor belt, check the triggering and resetting of the switch, and ensure that it can work accurately within the set angle.

Maintenance and upkeep

1. Regular inspectionRegularly inspect the sensors and contacts of the switch to ensure no wear or corrosion.
2. Cleaning treatmentKeep the equipment clean, especially the sensors and detection rods, to avoid dust or debris affecting the detection accuracy.
3. Lubrication and maintenanceRegularly lubricate the moving parts to ensure their flexibility and extend the service life of the equipment.

matters needing attention

• Stable installationEnsure that the switch is firmly fixed during installation to avoid affecting the detection effect due to vibration or impact.
• Fault handlingIf any malfunction is found, promptly inspect and replace damaged components to ensure the normal operation of the system.

epilogue

The JPK-10-45 deviation switch, with its high sensitivity detection capability, sturdy and durable design, and automatic reset function, has become an important protective device in belt conveyor systems. Whether in the coal mining, power, chemical, or metallurgical industries, JPK-10-45 can effectively prevent deviation problems, protect the safe operation of conveying equipment, and improve production efficiency.

Related Q&A FAQs:

1. What types of conveyor belts is the JPK-10-45 deviation switch suitable for?

JPK-10-45 deviation switch is suitable for various belt conveyor systems, including conveyor belts in coal mines, power, metallurgy, and chemical industries. It can effectively detect and alarm the deviation of the conveyor belt, protecting the equipment from damage.

2. Can the action angle and reset angle of the deviation switch be adjusted?

Yes, the action angle of JPK-10-45 is 10 °, and the reset angle is 45 °. These two angles can be adjusted according to actual needs to adapt to different operating conditions of the conveyor belt.

3. What is the protection level of JPK-10-45? Is it suitable for outdoor use?

JPK-10-45 has an IP66 protection level and excellent dust and water resistance, making it ideal for use outdoors or in harsh environments such as high humidity and dusty workplaces.