Product Overview:
JPNS-III deviation switch is a safety protection device used for belt conveyors, specifically designed to monitor and control the deviation of the conveyor belt. When the conveyor belt deviates, the switch will automatically trigger an alarm or stop signal to avoid damage to the conveyor belt or safety accidents. JPNS-III is characterized by durability, high sensitivity, and easy installation, making it suitable for various harsh industrial environments.
Main functions:
- Conveyor belt deviation detection:Real time monitoring of the conveyor belt for any deviation, and issuing a signal when the deviation exceeds the set range.
- Automatic protection function:When severe belt deviation is detected, the conveyor will automatically stop running to prevent equipment damage.
- Bidirectional monitoring:Can simultaneously detect both sides of the conveyor belt to ensure all-round protection.
Technical parameters:
- model:JPNS-III
- Action angle:15 °~35 ° (adjustable)
- Reset angle: 10°~20°
- Contact capacity:AC 380V / 5A
- Protection level:IP67
- Working temperature:-30 ℃ to+70 ℃
- Shell material:Cast aluminum alloy
- Output method:Mechanical contacts or electronic signals
- Applicable belt width:500mm~2400mm
- Installation method:Installed in fixed positions on both sides of the conveyor belt.
Product features:
- High sensitivity:Through high-precision sensors, slight deviations of the conveyor belt can be quickly and accurately sensed, ensuring timely response of the equipment.
- Adapt to harsh environments:It has high-strength waterproof, dustproof, and corrosion-resistant capabilities, and can operate reliably in extreme working environments.
- Adjustable action angle:Users can adjust the sensitivity of the switch according to the different operating conditions of the conveyor belt to adapt to various working conditions.
Application scenarios:
JPNS-III deviation switch is widely used in heavy industries such as mining, steel, chemical, port, power, building materials, etc. It is used for the protection of belt conveyor systems and can effectively prevent mechanical damage and shutdown accidents caused by belt deviation.
Installation and maintenance:
- Installation location:Installed at key positions on the conveyor belt, usually at the head or tail of the belt, to ensure accurate monitoring of belt deviation.
- Regular inspection:It is recommended to regularly check the operating status of the equipment, especially under high load conditions, to ensure that the contacts and sensors are working properly.
- Debugging and Calibration:During initial installation or maintenance, debugging is necessary to ensure that the action angle and reset angle are set appropriately.
Precautions for use:
- Avoid prolonged exposure to high humidity environments:Although the equipment has a high level of protection, prolonged exposure to extreme humidity may affect its performance. It is recommended to install protective covers appropriately.
- The setting of the action angle should be reasonable:The action angle should be set according to the specific operation of the conveyor belt to avoid setting it too high or too low, which may cause misoperation or stoppage.
- Regular maintenance:To ensure the long-term normal operation of the equipment, it is recommended to inspect and calibrate it as necessary every 6 months.
Related Q&A FAQs:
1. What is the operating principle of JPNS-III deviation switch?
The JPNS-III deviation switch monitors the deviation of the conveyor belt through mechanical or electronic sensors. When the deviation exceeds the set action angle, it triggers signal output or automatic shutdown to prevent equipment damage.
2. What is the protection level of JPNS-III deviation switch?
The protection level of JPNS-III is IP67, which has good waterproof and dustproof performance and can be used in harsh environments.
3. What industries is the JPNS-III deviation switch suitable for?
JPNS-III deviation switch is widely used in industries such as mining, steel, chemical, dock, and power to protect belt conveyor systems and ensure safe operation of equipment.
