Product Overview:The LL2 series deviation switch includes three models: LL2-I, LL2-II, and LL2-III, designed to monitor and control the deviation of conveyor belts. This series of switches has multiple functions and features, suitable for conveying systems in different industrial environments. Each model has differences in design and functionality to meet different application requirements.
Main features:
- high sensitivityAll models have high sensitivity detection function, which can monitor the deviation of the conveyor belt in real time and issue alarms or trigger control signals.
- durableAdopting high-strength materials and wear-resistant design, it is suitable for various industrial environments, including high temperature, low temperature, humidity, and dust environments.
- Protection levelEquipped with IP65 protection level, dustproof and waterproof, suitable for use in complex environments.
Model Description:
LL2-I deviation switch
- Design FeaturesLL2-I is mainly used for monitoring conveyor belt deviation in ordinary environments. It provides basic detection functions and is suitable for applications with low requirements.
- working voltageUsually supports 24V DC or 220V AC (please refer to the product data sheet for specific models).
- Installation methodUsually installed on the side or above the conveyor belt, it can effectively detect deviation.
- application areaSuitable for conveyor belt systems in general industrial environments.
LL2-II deviation switch
- Design FeaturesLL2-II provides higher sensitivity and reliability, suitable for more demanding industrial environments. It has a multi contact configuration to adapt to different control requirements.
- working voltageUsually supports 24V DC or 220V AC (please refer to the product data sheet for specific models).
- Installation methodCan be installed on both sides or top of the conveyor belt, supporting more flexible installation solutions.
- application areaSuitable for conveyor belt systems in high temperature, high humidity, or dusty environments.
LL2-III deviation switch
- Design FeaturesLL2-III has the highest sensitivity and durability, making it suitable for use in extreme industrial environments. It is usually equipped with additional protective measures such as explosion-proof design and special materials to enhance its durability.
- working voltageSupports multiple voltage options, including 24V DC, 110V AC, and 220V AC (please refer to the product data sheet for specific models).
- Installation methodSuitable for various complex installation environments, including high temperature, high pressure, and dust environments.
- application areaWidely used in demanding industrial fields such as mining, metallurgy, and chemical engineering.
Technical specifications:
- Working temperature range-20 ° C to+60 ° C (please refer to the product data sheet for specific models).
- Sensing rangeIt can be adjusted as needed to accommodate conveyor belts of different widths.
- Protection levelIP65, dustproof and waterproof, suitable for use in complex environments.
Installation and maintenance:
- Installation locationSelect the appropriate installation position based on the actual situation of the conveyor belt to ensure that the switch can effectively detect deviation. It is usually recommended to install on both sides or above the conveyor belt.
- Adjust settingsAdjust the sensitivity and sensing range of the switch according to the width and operating conditions of the conveyor belt.
- Maintenance inspectionRegularly check the working status and connection of the switch, clean the equipment to prevent dirt from affecting its performance. Regularly conduct functional testing to ensure the normal operation of the switch.
Summary:The LL2 series deviation switch includes three models: LL2-I, LL2-II, and LL2-III, which have different functions and characteristics and are suitable for conveyor belt systems in different industrial environments. By selecting and installing these switches reasonably, it is possible to effectively monitor the deviation of the conveyor belt and protect the conveyor system and related equipment.
Related Q&A FAQs:
1. How to choose the LL2 series deviation switch model that is suitable for my production environment?
Users may be interested in how to choose LL2-I, LL2-II, or LL2-III models based on specific requirements of the production environment, such as temperature, humidity, dust level, etc. They may want to understand the specific application scenarios and performance advantages of each model in order to make the most suitable choice.
2. What is the installation and adjustment process of LL2 series deviation switch?
Users may want to know how to correctly install the LL2 series deviation switch, including the selection of installation location, how to adjust sensitivity, and how to ensure that the switch can accurately detect deviation situations. They may also be concerned about the precautions and steps during installation.
3. What are the maintenance and troubleshooting methods for LL2 series deviation switches?
Users may be interested in how to perform regular maintenance and troubleshooting of LL2 series deviation switches. They may want to know how to clean equipment, check electrical connections, conduct functional testing, and how to troubleshoot and repair in case of malfunctions.
